Dell PowerConnect 7048P User Manual - Page 266

Logging Configuration Examples This section contains the following examples: • Configuring Local and Remote Logging • Configuring Email Alerting Configuring Local and Remote Logging This example shows how to enable switch auditing and CLI command logging. Log messages with a severity level of Notification (level 5) and above are sent to the RAM (buffered) log. Emergency, Critical, and Alert (level 2) log messages are written to the log file on the flash drive. All log messages are displayed on the console and sent to a remote syslog server. To configure the switch: 1 Enable switch auditing and CLI command logging. console#configure console(config)#logging audit console(config)#logging cli-command 2 Specify where the logs are sent locally and what severity level of message is to be logged. You can specify the severity as the level number, as shown in the first two commands, or as the keyword, shown in the third command. console(config)#logging buffered 5 console(config)#logging file 2 console(config)#logging console debugging 3 Define the remote log server. console(config)#logging 192.168.2.10 console(Config-logging)#description "Syslog Server" console(Config-logging)#level debug console(Config-logging)#exit console(config)#exit 266 Monitoring and Logging System Information