Epson EPL-N1200 Service Manual - Page 104

Fan Motor Removal, 2.2.11 Fan Motor Removal

Get Epson EPL-N1200 PDF manuals and user guides View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

Disassembly and Assembly EPL-N1200 Service Manual 3.2.2.11 Fan Motor Removal 1. Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it from light or place it in a dark area. 2. Remove the main controller board. (Refer to Section 3.2.1.1.) 3. Loosen two CC (M3x6) screws which secure the right cover. 4. Remove left and right tabs of the top cover from the printer base unit then remove the top cover. 5. Remove one CC (M3x6) screw on the fusing unit cover and remove the fusing unit cover. 6. Disconnect connector for the paper exit sensor then lay the rear panel unit flat. 7. Disconnect connector for the fan motor. 8. Remove two CCB(M3x8) screws then remove the fan motor. CCB(M3X8) Connector Fan Motor Paper Exit Sensor Figure 3-24. Fan Motor Removal 3-20 Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
3.2.2.11 Fan Motor Removal
1.
1.
Open the top cover.
Remove the imaging cartridge.
Cover the imaging cartridge to protect it
from light or place it in a dark area.
2.
Remove
the main controller board. (Refer to Section 3.2.1.1.)
3.
3.
Loosen two CC (M3x6) screws which secure the right cover.
4.
Remove left and right tabs of the top cover from the printer base unit then remove the top
cover.
5.
Remove one CC (M3x6) screw on the fusing unit cover and remove the fusing unit cover.
6.
Disconnect connector for the paper exit sensor then lay the rear panel unit
flat.
7.
Disconnect connector for the fan motor.
8.
Remove two CCB(M3x8) screws then remove the fan motor.
CCB(M3X8)
Fan Motor
Paper Exit Sensor
Connector
Figure 3-24. Fan Motor Removal
Disassembly and Assembly
EPL-N1200 Service Manual
3-20
Rev. A