Epson EPL-N1200 Service Manual - Page 109

Paper Pick Assembly Removal, Right Frame and Paper Pick Assy Matching

Get Epson EPL-N1200 PDF manuals and user guides View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

EPL-N1200 Service Manual Disassembly and Assembly 3.2.2.17 Paper Take-Up Roller Removal 1. Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it from light or place it in a dark area. 2. Remove the fusing unit. (Refer to Section 3.2.2.12.) 3. Remove the image transfer assembly. (Refer to Section 3.2.2.16.) 4. Remove the optical unit. (Refer to Section 3.2.2.4.) 5. Remove the roller cover. 6. Disconnect the cable for the toner empty sensor and remove the bridge which mounts the toner empty sensor. 7. Disconnect connectors CN1, CN2, CN3, the red wire terminal, and the black wire terminal on the high-voltage supply board. 8. Remove two CC (M3 × 8) screws on the paper pick unit. 9. Slide the paper pick unit to the left, lift the left side up, and remove the paper pick unit. 11. Remove one E-ring on the paper take-up clutch, and remove the paper take-up clutch. 12. Remove two E-rings and left bushings on the paper take-up roller shaft. 13. Remove the paper take-up rollers. Figure 3-33. Paper Pick Assembly Removal Figure 3-34. Right Frame and Paper Pick Assy Matching Rev. A 3-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
3.2.2.17
Paper Take-Up Roller Removal
1.
Open the top cover.
Remove the imaging cartridge.
Cover the imaging cartridge to protect it
from light or place it in a dark area.
2.
Remove the fusing unit.
(Refer to Section 3.2.2.12.)
3.
Remove the image transfer assembly. (Refer to Section 3.2.2.16.)
4.
4.
Remove the optical unit.
(Refer to Section 3.2.2.4.)
5.
Remove the roller cover.
6.
Disconnect the cable for the toner empty sensor and remove the bridge which mounts the
toner empty sensor.
7.
Disconnect connectors CN1, CN2, CN3, the red wire terminal, and the black wire terminal on
the high-voltage supply board.
8.
Remove two CC (M3
×
8) screws on the paper pick unit.
9.
Slide the paper pick unit to the left, lift the left side up, and remove the paper pick unit.
11.
Remove one E-ring on the paper take-up clutch, and remove the paper take-up clutch.
12.
13.
Remove the paper take-up rollers.
Figure 3-33. Paper Pick Assembly Removal
Figure 3-34. Right Frame and Paper Pick Assy Matching
EPL-N1200 Service Manual
Disassembly and Assembly
Rev. A
3-25