Epson EPL-N1200 Service Manual - Page 35
OPERATING INSTRUCTIONS, Control Panel,
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
General Description EPL-N1200 Service Manual 1.4 OPERATING INSTRUCTIONS This section describes the functions performed through the control panel, such as test print, hexadecimal dump, and SelecType. 1.4.1 Control Panel The printer control panel gives you easy control over most common printer operations. The panel consists of a liquid crystal display (LCD), indicator lights, and buttons. Figure 1-9. Control Panel Display (LCD) A 20-character (5 × 7 dot matrix) by 1-row liquid crystal display (LCD) unit that indicates printer status. A variety of printer parameters can be displayed and set using SelecType mode. Indicator lights o On Line ON: OFF: Flashing: Communication with the host is possible. Communication with the host is not currently possible. This state occurs when the system cannot shift from off line to on line, or vice versa. o Form Feed This LED indicates the data processing condition for each interface channel. ON: OFF: Flashing: Received data stored in the printer but has not been printed. No printable data remains in the printer. The printer is processing data. o Continue Flashes when an error is detected or a maintenance procedure is needed. An error message appears on the display at the same time. o OneTouch Menu 1 Indicates that OneTouch setting mode is active and OneTouch Menu 1 is in use. o One Touch Menu 2 Indicates that OneTouch setting mode is active and OneTouch Menu 2 is in use. o SelecType Indicates that SelecType setting mode is active. o All LEDs are flashing An error has occurred that requires a service call. 1-22 Rev. A