Epson EPL-N1200 Service Manual - Page 44

Table 1-15. Error Messages

Page 44 highlights

General Description EPL-N1200 Service Manual 1.4.4.2 Error Messages If any of the following errors occurs, it will be displayed on the LCD panel. The error must be cleared immediately using the measures shown in the following table. Table 1-15. Error Messages Message Paper Jam Feed Jam Printer Open Manual Feed XXX Paper Out XXXXX YYYY Toner Out Paper Set XXXXX YYYY Print Overrun Mem Overflow Illegal AUX I/F Card Illegal I/F Module Service Req XYYYY Status Measures A paper jam occurred. Open the top cover and remove jammed paper. Then close the top cover. A paper jam occurred in the feed process. Open the top cover and remove jammed paper. Then close the top cover. Cover is open. Close the top cover. Manual feed selected. Insert paper and press the On Line button. Perform a reset or warm boot. No paper is left in either the Load proper paper in paper tray or standard tray or optional cassette. optional cassette. The engine detects toner out and printing is terminated. Replace the imaging cartridge Press the Continue button clear the error temporarily. The paper in the selected tray is different from the paper size selection. When Auto Cont is off: Load proper paper in the correct paper tray. Press the Continue button without replacing paper. When Auto Cont is on: The error is automatically cleared. Engine speed is faster than print image processing. When the Auto Cont is off: Press Continue button. When Auto Cont is on: The error is automatically cleared. Data has filled the buffer. When Auto Cont is off: Press the Continue button. Perform reset or warm boot. When Auto Cont is on: The error is automatically cleared. The inserted I/F card not supported. Turn power off and remove the I/F card. The inserted I/F module not supported. Turn power off and remove the I/F module. Printer problem Service required. 1-32 Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149

1.4.4.2
Error Messages
If any of the following errors occurs, it will be displayed on the LCD panel. The error must be cleared
immediately using the measures shown in the following table.
Table 1-15. Error Messages
Message
Status
Measures
Paper Jam
A paper jam occurred.
Open the top cover and remove
jammed paper. Then close the top
cover.
Feed Jam
A paper jam occurred in the feed
process.
Open the top cover and remove
jammed paper. Then close the top
cover.
Printer Open
Cover is open.
Close the top cover.
Manual Feed XXX
Manual feed selected.
Insert paper and press the On Line
button.
Perform a reset or warm boot.
Paper Out XXXXX
YYYY
No paper is left in either the
standard tray or optional cassette.
Load proper paper in paper tray or
optional cassette.
Toner Out
The engine detects toner out and
printing is terminated.
Replace the imaging cartridge
Press the Continue button clear
the error
temporarily.
Paper Set XXXXX
YYYY
The paper in the selected tray is
different from the paper size
selection.
When Auto Cont is off:
Load proper paper in the correct
paper tray.
Press the Continue button without
replacing paper.
When Auto Cont is on:
The error is automatically cleared.
Print Overrun
Engine speed is faster than print
image processing.
When the Auto Cont is off:
Press Continue button.
When Auto Cont is on:
The error
is automatically cleared.
Mem Overflow
Data has filled the buffer.
When Auto Cont is off:
Press the Continue button.
Perform reset or warm boot.
When Auto Cont is on:
The error
is automatically cleared.
Illegal AUX I/F Card
The inserted I/F card not supported.
Turn power off and remove the I/F
card.
Illegal I/F Module
The inserted I/F module not
supported.
Turn power off and remove the I/F
module.
Service Req
XYYYY
Printer problem
Service required.
General Description
EPL-N1200 Service Manual
1-32
Rev. A