Epson EPL-N1200 Service Manual - Page 89
Shield Cover Removal, Control Panel Removal, 2.1.2 Control Panel Removal
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
EPL-N1200 Service Manual Disassembly and Assembly 3.2.1.2 Control Panel Removal 1. Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it from light or place it in a dark area. 2. Remove the main controller board. (Refer to Section 3.2.1.1.) 3. Remove one CC (M3x6) screw from the control panel and lift the panel forward. 4. Remove two CC (M3x8) screws and take the right cover away. 5. Remove two CC (M3x8) screws on the paper guide case. 6. Remove four CC (M3x6) screws on the top and two CC (M3x6) screws at the right of the shield cover and take it away. 7. Remove connector CN3 on the engine controller board. 8. Remove the control panel. CC(M3X8) CC(M3X6) CC(M3X8) Control Panel Paper Guide Case Figure 3-3. Control Panel Removal CC(M3X6) CC(M3X6) Figure 3-4. Shield Cover Removal Rev. A 3-5