Epson EPL-N1200 Service Manual - Page 88
DISASSEMBLY AND ASSEMBLY, Main Controller Removal, Main Controller Board Removal 1
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Disassembly and Assembly EPL-N1200 Service Manual 3.2 DISASSEMBLY AND ASSEMBLY This section describes and illustrates the procedures for removing and disassembling the components of the EPL-N1200. Cleaning is described in Chapter 6. The assembly procedures are not described, except for special notes where necessary, because assembly can be accomplished by performing disassembly in reverse. 3.2.1 Main Controller Section Removal The control section is comprised of the main controller board (C205 MAIN board) and the control panel unit. 3.2.1.1 Main Controller Board (C205 MAIN Board) Removal CAUTION Before you remove the main controller board, make sure that you remove any optional cards or cartridges. Otherwise, you may damage the cartridge or card connectors on the board as well as the cartridge or card itself. 1. Turn the printer so that its back side faces you. 2. Remove the four thumbscrews (M3 × 14). 3. Pull the plastic tabs to release the main controller board. 5. Grasp the board with both hands and pull it out of its slot. Figure 3-1. Main Controller Board Removal (1) Figure 3-2. Main Controller Board Removal (2) 3-4 Rev. A