Epson Equity 486DX2/50 PLUS User Manual - Page 110
Changing the Jumper Settings, Option Card, below.
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Changing the Jumper Settings If you need to change any jumper settings, follow these steps: 1. Remove any option cards that may be blocking your access to the jumpers. See page 6-12 for instructions. 2. Change the jumper settings as necessary according to the tables above. To move a jumper from one position to the other, use needle-nose pliers or tweezers to pull it off its pins and gently move it to the desired position. Be careful not to lose the jumper. Caution Be careful not to bend the jumper pins or damage any surrounding components on the main system board. 3. Replace any option cards you removed. See "Installing an Option Card," below. 4. Follow the instructions in Chapter 5 to replace the computer's cover. Installing and Removing Options 6 - 7