Epson Equity 486DX2/50 PLUS User Manual - Page 112
If you install a disk drive that uses a controller card, place, go into an 8-bit slot.
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
The illustration of the main system board on page 6-3 shows the six standard option slots inside your computer. Slot 5 is designed for an 8-bit option card and slots 0 through 4 are designed for 16-bit cards. As you can see below, a 16-bit card has an extra connector along the bottom. 16-bit card 8-bit card Usually it does not matter which slot an option card occupies, as long as it fits in the slot. For example, you can place some 8-bit cards in a 16-bit slot. However, you must follow these guidelines when deciding which slot to use: Ll An S-bit card with an additional tab along the bottom must go into an 8-bit slot. il If you install a disk drive that uses a controller card, place the card as close as possible to the drive it is controlling. Ll Some option cards must be installed in a specific slot. Consult the instructions that come with the card to see if this is the case. Installing and Removing Options 6-9