Epson Equity 486DX2/50 PLUS User Manual - Page 61
Setting the Diskette Drive Type(s
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Setting the Diskette Drive Type(s) Your system probably came with one factory-installed diskette drive. If you added a second diskette drive or removed one, you may need to change the diskette drive settings to match your configuration. If you haven't made any changes, you can verify your drive type settings. Follow these steps: 1. At the main menu, highlight Diskette drive. The current settings appear: Drive A: Drive B: 1.44 MB None If the diskette drive types on the screen match your diskette drive configuration, you can skip the rest of this section. 2. To change a setting, press IEnter The cursor block moves into the diskette drive submenu and you see the following: Not installed 360 KB drive 720 KB drive (3.5") 1.2 MB drive 1.44 MB drive (3.5") You also see themessage Selected drive light is ON. This tells you that the light on the diskette drive currently selected is on. 3. If you want to change the drive A settings, make sure Drive A: is highlighted and press 2En5 ter . If you want to change the drive B settings, highlight Drive B : and press CEnter The cursor block moves into the submenu. Running the Setup Program 2 - 2 7