Epson Equity 486DX2/50 PLUS User Manual - Page 41
Display., column, Monochrome 80 column, EGA, MCGA, VGA or other, as the following
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Note If you have installed an EGA or VGA display adapter card, or another type of card that you want to be the primary display adapter, you must set jumper JP4 on the main system board to disable the built-in VGA interface. If you have installed one or more video cards, you also may need to set jumper JP6 to tell the computer the type of monitor you are using: either monochrome or color. If you have two types of cards, set the jumper to indicate which one is your primary monitor type. See Chapter 6 for instructions on changing jumper settings. 1. At the main Setup menu, highlight Display. A submenu appears identifying the current display adapter type, such as the following: VGA If the display adapter type is correct for your system, you can skip the rest of this section. 2. To change the display adapter setting, press (Enter. The cursor block moves into the submenu and you see an additional menu on the right side: CGA 40 column CGA 80 column Monochrome 80 column EGA,MCGA,VGA or other Running the Setup Program 2-7