Epson Equity 486DX2/50 PLUS User Manual - Page 42

3. Press m to move the cursor block into this submenu and then use I' or 1 to highlight the option that matches your display adapter type. If you are not sure which one to choose, follow these guidelines: tl If you are using the built-in VGA adapter or have installed a VGA, EGA, or MCGA card, select EGA, MCGA,VGA or other. tl If you have a color graphics adapter (CGA) or a multi-mode graphics adapter (MGA) attached to an RGB (color) monitor, select CGA 80 column. (Also set the color/mono switch on the MGA card to color.) LI If you have a composite color monitor, such as a color television with a video input, try selecting CGA 80 column. If the resulting resolution is poor, run Setup again and select CGA 40 column. tl If you have a monochrome display adapter (MDA), an MGA, or a Hercules MGA attached to a monochrome monitor, choose Monochrome 80 column. (Also set the color/mono switch on the MGA card to mono.) tl If you have any other combination of monitor and display adapter card, select EGA, MCGA, VGA o r other. In addition, consult the documentation supplied with your display adapter card. Note If you have two different display adapters, select the setting for the one you want to be your primary display adapter. The other one is your secondary adapter. A message appears at power-on telling you whether you are currently using your primary or secondary adapter. 2-8 Running the Setup Program