Epson Equity 486DX2/50 PLUS User Manual - Page 141
interface so the row in the connector with the blocked hole
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
If you are installing your second drive, the cable is already attached to your other drive; use the second connector on that cable. Connect the cable as described below; then skip to step 5. To connect the cable, align the cable connector with the drive interface so the row in the connector with the blocked hole lines up with the row in the interface with the missing pin, as shown below. Then push in the connector. missing pin Installing and Removing Drives 7 - 1 9
If you are installing your second drive, the cable is already
attached to your other drive; use the second connector on
that cable. Connect the cable as described below; then skip
to step 5.
To connect the cable, align the cable connector with the drive
interface so the row in the connector with the blocked hole
lines up with the row in the interface with the missing pin,
as shown below. Then push in the connector.
missing pin
Installing and Removing Drives
7-19