Epson Equity 486DX2/50 PLUS User Manual - Page 165
Password Problems
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Password Problems If you have any trouble using your password, try the following: 1. If you think you know the correct password, reset the computer and try again. See Chapter 3 for instructions. Note If you enabled network server mode when you set a password, you do not see the key prompt. For more information, see "Using Your Computer as a Network Server" in Chapter 4. 2. If you know the current power-on password but you want to change or delete it, see Chapter 3 for instructions. (You cannot change or delete a power-on password and remain in network server mode.) 3. If you do not know the current power-on password and you do not want to set a new one, see "Removing a Password," below. 4. If you do not know the current power-on password and you want to set a new one, see "Setting a New Password," below. 5. If you are setting a password and you see the following message, you need to change a jumper setting inside the computer: TURN OFF POWER AND CORRECT JUMPER SETTING TO ENABLE PASSWORD CHECKING Remove any diskettes, turn off the computer, and follow the instructions under "Changing the Jumper Settings" in Chapter 6 to enable the password function. B - 1 0 Troubleshooting