Epson Equity 486DX2/50 PLUS User Manual - Page 24
Using a Display Adapter Card, monochrome. See the documentation that came with your
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Using a Display Adapter Card If you are using a non-VGA monitor, you'll need to install a display adapter (video) card in one of the computer's option slots before you can connect the monitor. (Your dealer may have already installed the video card for you.) If the video card is not installed, follow the instructions in Chapter 6 to install an option card. But first, check the following table to make sure your display adapter card and monitor are properly matched. Monitor/video card compatibility Monitor Video card Monochrome Monochrome display adapter (MDA) Multi-mode graphics adapter (MGA) Enhanced graphics adapter (EGA) Hercules' graphics card CGA Color graphics adapter (CGA) Multi-mode graphics adapter (MGA) Enhanced graphics adapter (EGA) EGA Enhanced graphics adapter (EGA) Monochrome or color VGA Video graphics array (VGA) Extended VGA Super VGA adapter switches or jumpers on the card are set properly. For example, you may need to change a setting to select color or monochrome. See the documentation that came with your monitor or video card for instructions. If you install an EGA or VGA display adapter card or if you install another type of card that you want to be the primary display adapter, you must set jumper JP4 on the main system board to disable the built-in VGA interface. 1-6 Setting Up Your System