Epson Equity 486DX2/50 PLUS User Manual - Page 84
Using the AFDD Program, Drive A, 44MB <, Set and Reboot, Any other key to abort ?
View all Epson Equity 486DX2/50 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Using the AFDD Program AFDD reverses the current diskette drive assignments and resets the system. When you are done using the reversed drive assignments, you can use the AFDD program again to reassign the drives to their original configuration. The AFDD program is provided with your system on the Reference diskette. If you do not have a hard disk, insert your Reference diskette in drive A and log onto drive A before you enter the command to start the program. If you have a hard disk drive, copy the file AFDD.EXE from the Reference diskette onto your hard disk (if you have not already done so); then you can run the program from there. To run AFDD, type the following at the command prompt and press I: AFDD You see messages such as the following: New Assign Present Drive A: 1.44MB