Garmin Edge Explore 2 Owners Manual - Page 47

Installing the Standard Mount, Releasing the Edge

Get Garmin Edge Explore 2 PDF manuals and user guides View all Garmin Edge Explore 2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Installing the Standard Mount For the best GPS reception and screen visibility, position the bike mount so the device is horizontal to the ground and the front of the device is oriented toward the sky. You can install the bike mount on the stem or the handlebar. NOTE: If you do not have this mount, you can skip this task. 1 Select a secure location to mount the device where it does not interfere with the safe operation of your bike. 2 Place the rubber disk on the back of the bike mount. Two rubber disks are included, and you can select the disk that best fits your bike. The rubber tabs align with the back of the bike mount so it stays in place. 3 Place the bike mount on the bike stem. 4 Attach the bike mount securely using the two bands . 5 Align the tabs on the back of the device with the bike mount notches . 6 Press down slightly and turn the device clockwise until it locks into place. Releasing the Edge 1 Turn the Edge clockwise to unlock the device. 2 Lift the Edge off the mount. Device Information 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Installing the Standard Mount
For the best GPS reception and screen visibility, position the bike mount so the device is horizontal to the
ground and the front of the device is oriented toward the sky. You can install the bike mount on the stem or the
handlebar.
NOTE:
If you do not have this mount, you can skip this task.
1
Select a secure location to mount the device where it does not interfere with the safe operation of your bike.
2
Place the rubber disk
on the back of the bike mount.
Two rubber disks are included, and you can select the disk that best fits your bike. The rubber tabs align with
the back of the bike mount so it stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
.
5
Align the tabs on the back of the device with the bike mount notches
.
6
Press down slightly and turn the device clockwise until it locks into place.
Releasing the Edge
1
Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Device Information
41