Garmin eTrex Legend C Owner's Manual - Page 16
Satellite - gps manual
UPC - 753759045555
View all Garmin eTrex Legend C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Satellite Options Satellite Page Options Menu Highlight the on-screen button at the top of the page & press in on the THUMB STICK. The Satellite Page Options Menu "GPS Off" Message 'North Up' Skyview Orientation 6 The Satellite Page options include: Use With GPS Off - Use this option when you are indoors, a clear view of the sky is obstructed, or you want to save battery power. You can enter data, create routes, etc., but cannot navigate in this mode. Track Up/North Up - You can orient the satellite skyview by selecting 'Track Up' (your direction of travel) or 'North Up' (the satellite skyview oriented to the north). New Elevation - You can manually enter a new, more accurate elevation, if known, to increase position accuracy. New Location - If you are more than 600 miles from where you last used the unit, select the 'New Location' and then the 'Use Map' options to approximate your location. This gives the unit reference information and speeds satellite acquisition. To select the 'Use With GPS Off' option: 1. Use the THUMB STICK to highlight the Option Menu button at the top of the page and then press it in to display the Options Menu. 2. Use the THUMB STICK to highlight the 'Use With GPS Off' option and then press it in to activate. The eTrex Legend stops tracking satellites and should not be used for navigation. However, the next time you turn the unit on, it returns to Normal GPS operation. To select 'Track Up' or 'North Up': 1. Use the THUMB STICK to highlight the Option Menu button at the top of the page and then press it in to display the Options Menu. 2. Highlight either the 'Track Up' or 'North Up' option (depending on which is currently in use), and press in on the THUMB STICK to activate. How to enter a new elevation: 1. Use the THUMB STICK to display the Options Menu. 2. Highlight 'New Elevation' and then press in on the