Garmin eTrex Summit Owner's Manual - Page 56
To Select an operating mode, Turning the compass On/Off, Turning 'AUTO CAL' On/Off
View all Garmin eTrex Summit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Reference System Page Press and hold the PAGE key to activate the compass and display the Pointer Page Auto Calibrate 54 To Select an operating mode: 1. With the MENU Page displayed, highlight 'SETUP' and press ENTER. The SETUP Page appears. 2. Using the UP or DOWN Button highlight 'SYSTEM' and press ENTER. The SYSTEM Page appears. 3. Using the UP or DOWN Button highlight the 'GPS' field and press ENTER. The Option List will appear. 4. Using the UP or DOWN Button highlight the desired mode and press ENTER. Compass The eTrex Summit will allow you to turn the Electronic Compass on and off. Turning the compass off when not needed will help conserve battery power. Turning the compass On/Off: 1. With the MENU Page displayed highlight 'SETUP' and press ENTER. The SETUP Page appears. 2. Using the UP or DOWN Button, highlight 'SYSTEM' and press ENTER. The SYSTEM Page appears. 3. Using the UP or DOWN Button, highlight the 'COMPASS' field and press ENTER. 4. Using the UP or DOWN Button, highlight the desired mode and press ENTER. Altimeter The Altimeter can use GPS altitude to perform an automatic calibration. While this is not as accurate as the calibration procedure described on page 42, it can be useful in the event that you do not know your current elevation or the barometric pressure. Turning 'AUTO CAL' On/Off: 1. With the MENU Page displayed highlight 'SETUP' and press ENTER. The SETUP Page appears. 2. Using the UP or DOWN Button, highlight 'SYSTEM' and press ENTER. The SYSTEM Page appears. 3. Using the UP or DOWN Button, highlight the 'ALTIMETER' field and press ENTER. 4. Using the UP or DOWN Button highlight the desired mode and press ENTER.