Garmin eTrex Summit Owner's Manual - Page 57
To select a pressure for display, To select a language - updates
View all Garmin eTrex Summit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Reference Pressure You can set the eTrex Summit to display either normalized pressure or the local ambient pressure in the Elevation Page cycle field. The normalized pressure is referenced against the last calibrated altititude or pressure. To select a pressure for display: 1. With the MENU Page displayed, highlight 'SETUP' and press ENTER. The SETUP Page appears. 2. Using the UP or DOWN Button, highlight 'SYSTEM' and press ENTER. The SYSTEM Page appears. 3. Using the UP or DOWN Button, highlight the 'PRES- SURE' field and press ENTER. 4. Using the UP or DOWN Button, highlight the desired pressure and press ENTER. Language The eTrex Summit can display in 12 languages. To select a language: 1. With the MENU Page displayed, highlight 'SETUP' and press ENTER. The SETUP Page appears. 2. Using the UP or DOWN Button, highlight 'SYSTEM' and press ENTER. The SYSTEM Page appears. 3. Using the UP or DOWN Button, highlight the 'LAN- GUAGE' field and press ENTER. 4. Using the UP or DOWN Button, highlight the desired selection and press ENTER. Software Button The Software Page shows the eTrex Summit's current software version. To update the eTrex Summit's software, visit the GARMIN web site www.garmin.com. Defaults Button The 'DEFAULTS' Button resets all of the 'SYSTEM' setting to the factory defaults. System Page The eTrex Summit can display in 12 different languages. The System Page shows you the software version, allowing you to update from GARMIN'S web site. 55