Gateway E-9510T Gateway 9510 Server User Guide - Page 112
Resetting BIOS passwords, To clear the BIOS passwords
View all Gateway E-9510T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Resetting the BIOS Resetting BIOS passwords To reset BIOS password(s), you must either reset and clear all BIOS settings, or use the Password Clear jumper. To reset BIOS passwords, follow the instructions in "Resetting the BIOS" on page 105. To clear the BIOS password(s): 1 Turn off the server, then disconnect the power cords and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 42. Caution Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper. 3 Remove the jumper across pins 5-6 of header J1D1, then place the jumper across pins 6-7. J1D1 1 2 3 CMOS CLEAR BMC Control Force Erase PASSWORD 5 CLEAR Protect 6 Erase 7 RECOVERY 9 BOOT Normal Boot 10 Recovery Boot 11 4 Follow the instructions in "Closing the server case" on page 52. 5 Reconnect the power cords and turn on the server. The BIOS password(s) is cleared. www.gateway.com 107