Gateway E-9510T Gateway 9510 Server User Guide - Page 41
Default - No forced update, Force update, Default - Boot block, protected, Boot block unprotected
View all Gateway E-9510T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3: Maintaining Your Server Caution If you do not disconnect the power cords when instructed to in this procedure, the BMC firmware will not update. 2 Follow the instructions in "Opening the server case" on page 42. 3 Follow the instructions in "Removing the air ducts" on page 46. 4 Move the shorting block from pins 2-3 to pins 1-2 on the Boot Block Update jumper (J1B1) on the IMM module. J1B1 1 2 3 1 2 3 2 - 3 Default - Boot block protected 1 - 2 Boot block unprotected J2B1 3 2 1 3 2 1 1 - 2 Default - No forced update 2 - 3 Force update 5 Move the shorting block from pins 1-2 to pins 2-3 on the Force Update jumper (J2B1) on the IMM module. 6 Follow the instructions in "Installing the air ducts" on page 47. 7 Follow the instructions in "Closing the server case" on page 52, then reconnect the power cord. 36 www.gateway.com