Gateway E-9510T Gateway 9510 Server User Guide - Page 83
Update the FRU/SDR by following the instructions
View all Gateway E-9510T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 4: Installing Components 7 Grasp the IMM module board by the edges (close to the mounting connector), align the board with the IMM connector on the system board, then gently apply pressure to seat the module. Make sure the module is fully seated and the nylon standoffs are inserted into the corresponding holes in the system board. 8 Update the base management controller firmware by following the instructions in "Updating the baseboard management controller firmware" on page 35. 9 Update the FRU/SDR by following the instructions in "Updating the FRU/SDR" on page 37). 10 Reinstall the GSM software (from a CD which accompanied your server). When you subsequently reboot your server, the GSM software will take over management of the server. 78 www.gateway.com