Gateway E-9510T Gateway 9510 Server User Guide - Page 19
Setting Up Your Server, following the instructions
View all Gateway E-9510T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 2: Setting Up Your Server a Lay the chassis on its right side (facing the front of the server). b Use a straight blade screwdriver to pop the center plastic rivet free from each foot. c Remove the feet (and leave the server on its side). 7 Remove the diskette, CD, and DVD drives and filler panels from the server by following the instructions in "Installing or replacing a fixed, removable-media drive" on page 54. 8 Re-orient the Serial/USB port front panel on the front of the server. a Remove any USB or serial cables from the Serial/USB port front panel. b Loosen the captive thumbscrew securing the Serial/USB port front panel to the server, then remove the Serial USB port front panel. 14 www.gateway.com
14
www.gateway.com
Chapter 2: Setting Up Your Server
a
Lay the chassis on its right side (facing the front of the server).
b
Use a straight blade screwdriver to pop the center plastic rivet free from each foot.
c
Remove the feet (and leave the server on its side).
7
Remove the diskette, CD, and DVD drives and filler panels from the server by
following the instructions in
“Installing or replacing a fixed, removable-media drive”
on page 54
.
8
Re-orient the Serial/USB port front panel on the front of the server.
a
Remove any USB or serial cables from the Serial/USB port front panel.
b
Loosen the captive thumbscrew securing the Serial/USB port front panel to the
server, then remove the Serial USB port front panel.