Gateway E-9510T Gateway 9510 Server User Guide - Page 58
Installing drives
View all Gateway E-9510T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Installing drives Installing drives Your server's basic configuration includes one CD or DVD drive and one USB 3.5-inch diskette drive (included with the accessories and not installed in the server). Your server also has two additional 5.25-inch drive bays (if your server is equipped with the LCP panel, only one additional 5.25-inch drive is available). Your server can have one of the following hard drive configurations: ■ As many as six, hot-swap SATA (standard) or SCSI (optional) drives in one drive bay ■ As many as four, hot-swap SCSI drives in an optional second drive bay (with SCSI option) CD or DVD drive 5.25-inch drive bay Local Control Panel (LCP) (optional - shown installed in bottom 5.25-inch drive bay) As you prepare to install drives, remember: ■ Do not use the top 5.25-inch drive bay for drives which have electronic components exposed on the top. Drive mounting rails at the top of the bay may damage any exposed electronic components. ■ Before you install a drive, see the drive's documentation for information on configuring the drive, setting drive jumpers, and attaching cables. www.gateway.com 53