Gateway E-9510T Gateway 9510 Server User Guide - Page 99
Turn on the server., when the Gateway logo screen appears during startup. The BIOS Setup utility
View all Gateway E-9510T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 4: Installing Components 6 Locate the old battery on the system board and note its orientation. You will need to install the new battery the same way. 7 Push the battery retention clip away from the battery until the battery pops up. 8 Remove the old battery. 9 Make sure that the positive (+) side of the new battery is facing correctly, then press the new battery into the socket until it snaps into place. 10 Follow the instructions in "Closing the server case" on page 52. 11 Turn on the server. 12 Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens. 13 Restore any BIOS settings that you wrote down in Step 3. 14 Save all your settings and close the BIOS Setup utility. 94 www.gateway.com
94
www.gateway.com
Chapter 4: Installing Components
6
Locate the old battery on the system board and note its orientation. You will need
to install the new battery the same way.
7
Push the battery retention clip away from the battery until the battery pops up.
8
Remove the old battery.
9
Make sure that the positive (+) side of the new battery is facing correctly, then press
the new battery into the socket until it snaps into place.
10
Follow the instructions in
“Closing the server case” on page 52
.
11
Turn on the server.
12
Press
F2
when the Gateway logo screen appears during startup. The BIOS Setup utility
opens.
13
Restore any BIOS settings that you wrote down in
Step 3
.
14
Save all your settings and close the BIOS Setup utility.