HP 2100 Service Manual - Page 177
Replacing the Pickup Roller, Inserting the Pickup Roller back in the White Bushing
UPC - 873662008284
View all HP 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
b Lower the other end of the pick-up roller until it rests on the bottom of the carriage. Figure 7-18Replacing the Pickup Roller 4 Slide the slotted end of the pickup roller's shaft into the white bushing. Rotate the roller while sliding it so that its slotted shaft rests over the drive shaft. The black bushing will not fit if the slotted end of the pickup roller's shaft is not properly inserted over the drive shaft. Figure 7-19Inserting the Pickup Roller back in the White Bushing 5 Slide the black bushing through the carriage opening and over the non-slotted end of the pickup roller's shaft. The tab on the black bushing must be oriented so that it will fit through the keyed opening on the carriage. If the black bushing does not fit, the slotted end of the pickup C4170-90959 Parts Removal Tree 167