HP 2100 Service Manual - Page 214

Printer Drive Assembly Removal 1 Remove the following assemblies: • Remove the toner cartridge. (See "Toner Cartridge Removal" (page 156) for instructions. • Remove the DIMM cover. (See "DIMM Cover Removal" (page 172) for instructions.) • Remove the rear cover. (See "Rear Cover Removal" (page 177) for instructions.) • Remove the top cover. (See "Top Cover Removal" (page 189) for instructions.) • Remove the formatter PCB. (See "Formatter PCB Removal" (page 174) for instructions.) 2 Disconnect the ribbon cable and the main motor cable shown in figure 7-73. The green ground wire is disconnected in the next step. Figure 7-73Disconnecting the Printer Drive Assembly's Cables 3 Remove the (two ground and five self-tapping) screws shown in figure 7-74. 204 7 Removal and Replacement C4170-90959