HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - User Guide - Page 219

Chapter 5 Problem Solving 219 Printer Messages (continued) Message 68 NVRAM ERROR CHECK SETTINGS Explanation or Recommended Action An error occurred in the printer's nonvolatile memory (NVRAM) and one or more printer settings has been reset to its factory default. Print a configuration page and check the printer settings to determine which values have changed (page 278). If this message persists, contact an HP-authorized service or support provider. (See the HP Customer Care pages at the front of this user guide.) 68 NVRAM FULL CHECK SETTINGS The printer's nonvolatile memory (NVRAM) is full. Some settings might have been reset to the factory defaults. Print a configuration page and check the printer settings to determine which values have changed (page 278). Hold down CANCEL JOB while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used. If this message persists, contact an HP-authorized service or support provider. (See the HP Customer Care pages at the front of this user guide.) Understanding Printer Messages