HP 9500hdn HP Color LaserJet 9500nand 9500hdn - User Guide - Page 156
A job cannot be stored on the printer, because of a memory, disk, or
UPC - 808736429689
View all HP 9500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
http://www.hp.com/support/lj9500 Message TYPE MISMATCH TRAY X=[TYPE] UNABLE TO MOPY JOB UNABLE TO STORE JOB WAIT FOR PRINTER TO REINITIALIZE Description or explanation Recommended action The system detected a different type of media than the type that is specified for the tray in the paper path for the tray (X). Verify that the correct media is loaded in the tray. Check the driver settings to make sure that the expected media type is selected. Check the media-type settings at the printer control panel to make sure that the printer is set for the media type that is in the tray. See the printer software online help for more information. A mopy job cannot be mopied because of The disk might be full. Try saving to a a memory, disk, or configuration problem. new disk. Only one copy will be produced. A job cannot be stored on the printer because of a memory, disk, or configuration problem. The disk might be full. Try saving to a new disk. The RAM disk setting has been changed before the printer automatically restarts. This change will not take effect until the printer reinitializes. If you change the mode of the external device, turn the printer off, turn the printer on, and then wait for the printer to reinitialize. 154 Chapter 6 - Solving problems Rev. 1.0