HP 9500hdn HP Color LaserJet 9500nand 9500hdn - User Guide - Page 70
Using one hand to support the underside of the transfer roller, turn the roller
UPC - 808736429689
View all HP 9500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
http://www.hp.com/support/lj9500 6 8 10 6 Slide the brush into the transfer-roller slot until it stops, and then slide the brush toward you until the brush is almost out of the transfer-roller slot. CAUTION Do not pull up or sideways on the brush. Push and pull the brush straight into and out of the printer. 7 Repeat step 6 three times, and then remove the brush from the printer. 8 Remove the brush from the tongs by raising the snap on the back of the brush and pulling the brush away from the tongs. 9 Replace the tongs and brush on the inside of the right door. 10 Using one hand to support the underside of the transfer roller, turn the roller to a 45-degree angle and align the roller with the slot. Slide the roller into the slot until it stops. CAUTION Do not touch the black foam roller, and take care not to scratch the underside of the image transfer belt as you insert the roller into the printer. 68 Chapter 4 - Improving print quality Rev. 1.0