HP CP3525x HP Color LaserJet CP3525 Series Printers - Software Technical Refer - Page 200

If you have more than one driver installed for the product (for example, the default HP PCL 6 Print Driver and the HP PCL 5 Universal Print Driver), the Update Now feature works automatically only on the driver on which it is activated. The other driver will not be updated, and might show the default setting for the specific product model. Tray 3 This control specifies whether you have Tray 3, an additional 500-sheet tray, installed on the product. Tray 3 comes standard on the HP Color LaserJet CP3525x product model, and is optional on the other HP Color LaserJet CP3525 Series models. Duplex Unit (for 2-Sided Printing) The duplexing unit comes installed on the HP Color LaserJet CP3525dn and the HP Color LaserJet CP3525x product models. NOTE: The HP Color LaserJet CP3525 Series product supports smart duplexing. The product uses the smart duplexing feature to detect information on both sides of the print job pages and only runs the pages through the duplexing unit if printable information appears on the second side of the page. Allow Manual Duplexing Select Allow Manual Duplexing to print on both sides of any supported size and most types of paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the paper stack into the input tray to print the second side. The product pauses while you make this adjustment. This setting is enabled by default. Printer Hard Disk When this option is installed, the Job Storage option and the Mopier Mode are enabled in the print driver. Use the Job Storage option to store print jobs and then print them later from the control panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Job Storage When Job Storage is enabled, the product can store print jobs so that you can gain access to those print jobs later at the control panel. Job Separator Use this control to specify whether a print job identifier page should be printed between print jobs. Mopier Mode The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases performance and reduces network traffic by transmitting the job to the product once, and then storing it in memory or on the hard disk. The remainder of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be created, controlled, managed, and finished from the computer, which eliminates the extra step of using a photocopier. The HP Color LaserJet CP3525 Series supports the transmit-once mopying feature when the Mopier Mode: setting on the Device Settings tab is Enabled. 180 Chapter 4 HP PCL 6 Print Driver for Windows ENWW