HP CP3525x HP Color LaserJet CP3525 Series Printers - Software Technical Refer - Page 298
Downloading custom color profiles, Custom color-profile .RFU files are named as follows
UPC - 883585892105
View all HP CP3525x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
Three messages appear during a normal update process; a fourth (RESEND UPGRADE) appears only if the update process does not succeed. Table 7-3 Update messages Printer message Explanation RECEIVING UPGRADE This message appears from the time the product recognizes the beginning of an .RFU update until the time the product has verified the validity and integrity of the .RFU update. NOTE: If the remote firmware update process is interrupted before the firmware is downloaded (while RECEIVING UPGRADE appears on the control-panel display), the firmware file must be sent again. No message appears on the product control panel to indicate that the update was interrupted. PERFORMING UPGRADE This message appears while the product is actually reprogramming the firmware. NOTE: If power is lost during the flash DIMM update (while PERFORMING UPGRADE appears on the control-panel display), the update is interrupted and the message RESEND UPGRADE appears on the control-panel display. INITIALIZING This message appears from the time the product has finished reprogramming the DIMM until the product reinitializes. RESEND UPGRADE This message appears (in English only) if the firmware update fails because the RFU process is interrupted. It can also occur if firmware for accessories (such as the duplex unit or an output device fails to update. Perform another update by any means that is supported by the product, regardless of the connection (network, parallel, or USB). RFU LOAD ERROR SEND RFU UPGRADE ON PORT where X = Network or USB This message appears (in English only) if the firmware update fails because the print-engine firmware is corrupted. NOTE: When this message appears, the firmware upgrade must be sent twice to upgrade all firmware components, even though the product returns to ready after the first upgrade. DOWNLOAD FILE NOW The wrong firmware file was sent to the product. Send the correct firmware file. SEND RFU UPGRADE MISMATCH BETWEEN PRODUCT AND FILE NOTE: To verify that the firmware update succeeded, print a new configuration page from the control panel and verify that the firmware date code on the configuration page has changed. NOTE: If the product exhibits unexpected behavior after correcting a firmware update, turn the power off, and then back on. Downloading custom color profiles Obtain custom color profiles just as you would any other remote-firmware update, using the procedures described in these sections. Custom color-profile .RFU files are named as follows: clj####__.RFU 278 Chapter 7 Engineering Details ENWW