HP CP3525x HP Color LaserJet CP3525 Series Printers - Software Technical Refer - Page 276
Socket/HP Jet Direct, Collation in Printer
UPC - 883585892105
View all HP CP3525x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
If you are using Rendezvous, carry out the following step: Select the product in the Name list. The Printer Model and Model Name are selected automatically. NOTE: If you are on a network that has more than one product, print a configuration page and match the Rendezvous Printer Name to the name on the list to identify the product that you are installing. NOTE: If the product does not appear in the list, verify that the product is on and connected to the network. If it still does not appear, try turning the product off and then on again. Finally, turn the computer off and then on again, then restart the setup process. For more troubleshooting information, see Troubleshooting the product setup on page 257. NOTE: If the automatic selection fails, or if you want to manually select a .PPD file, click the Printer Model pull-down menu, select HP, and then select the .PPD file that you want to add. If the product PPD does not appear in the Model Name list, turn the computer off and then on again and restart the setup process. If you are using IP Printing, carry out the following steps: a. Choose Socket/HP Jet Direct from the Printer Type pull-down menu. This is the recommended setting for HP products. b. Follow these directions to print the product configuration pages. Print a configuration page i. Press the menu button to open the menus. ii. Press the up arrow or the down arrow to scroll to INFORMATION, and then press OK. iii. Press the up arrow or the down arrow to scroll to PRINT CONFIGURATION. iv. Press OK to print the configuration page. c. On the first configuration page, under Product Settings, find the IP Address. Type this address into the Printer Address field on the add printer screen. d. Select the Printer Model and select the product in the Model Name list. If the product PPD does not appear in the Model Name list, turn the computer off and then on again and restart the setup process. 6. Click Add. The product appears in the Printer List. 7. To configure installable options such as a duplexing unit or optional paper trays, click Show Info? and select Installable Options in the drop-down menu. NOTE: This step is necessary only for network connections and USB connections that use Rendezvous/Bonjour. AppleTalk automatically configures the installable options. 8. In the Optional Trays: drop-down menu, select the trays that are installed on the product. 9. In the Collation in Printer: drop-down menu, select the amount of memory and hard disk combination that is installed in the product: 256 Chapter 6 Macintosh software and utilities ENWW