HP Cisco Nexus 5000 Cisco MDS 9000 Family Fabric Manager Quick Configuration G - Page 25

Chapter 2 Initial Switch Configuration Verifying the Module Status Send documentation comments to [email protected] Verifying the Module Status Before you proceed with further configuration of the switch, ensure that the modules in the chassis are functioning as designed. To verify the status of a module at any time, issue the show module command. All the hardware that was physically installed should be displayed. A sample output of the show module command follows: switch# show module Mod Ports Module-Type Model Status 2 32 1/2 Gbps FC Module DS-X9032 ok 3 16 1/2 Gbps FC Module DS-X9016 ok 4 8 IP Storage Services Module DS-X9308-SMIP ok 5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active * 6 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 ha-standby 7 0 Caching Services Module DS-X9560-SMAP ok 9 32 Advanced Services Module DS-X9032-SMV ok Mod Sw Hw World-Wide-Name(s) (WWN) 2 2.1(1a) 1.1 20:41:00:05:30:00:86:9e to 20:60:00:05:30:00:86:9e 3 2.1(1a) 3.0 20:81:00:05:30:00:86:9e to 20:90:00:05:30:00:86:9e 4 2.1(1a) 4.0 20:c1:00:05:30:00:86:9e to 20:c8:00:05:30:00:86:9e 5 2.1(1a) 4.0 -- 6 2.1(1a) 4.0 -- 7 2.1(1a) 0.702 -- 9 2.1(1a) 0.502 22:01:00:05:30:00:86:9e to 22:20:00:05:30:00:86:9e Mod Application Image Description 7 svc-node1 7 svc-node2 9 SSI linecard image Application Image Version 1.3(5m) 1.3(5m) 2.1(1) Mod MAC-Address(es) Serial-Num 2 00-0c-30-d9-eb-60 to 00-0c-30-d9-eb-64 JAB074704EJ 3 00-0c-30-0d-27-54 to 00-0c-30-0d-27-58 JAB074004RR 4 00-0c-30-da-92-88 to 00-0c-30-da-92-94 JAB075204ZN 5 00-0c-30-d9-dc-d0 to 00-0c-30-d9-dc-d4 JAB074504RC 6 00-0c-30-d9-ef-80 to 00-0c-30-d9-ef-84 JAB0747055Y 7 00-0d-bc-2f-bc-b8 to 00-0d-bc-2f-bd-3c JAB073907DK 9 00-05-30-00-ad-4e to 00-05-30-00-ad-52 JAB070605QV * this terminal session Note If you do not see all the installed hardware, contact your storage vendor support organization for further assistance. OL-7765-05 Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide 2-9