HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 106
HP BMC IPMI Driver Events, hpWbemDump Events
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
HP BMC IPMI Driver Events Source in Windows Event Log: hpipmi Event ID Event Severity Event Description Error 1000 During communication with the IPMI BMC device, the system detected that the BMC entered an error state. The driver attempted to set the BMC state to a working state but failed to do so. After 20 successive attempts, the driver has set the IPMI device to a non working state. It is recommended that you seek assistance from Hewlett-Packard. You can return the device instance to the working state by disabling and enabling the IPMI device instance labeled Hewlett-Packard IPMI Device. You can locate the IPMI device instance within the Device Manager user interface. 1001 Error A IPMI device was not recognized or detected, the IPMI device driver was not loaded. 1002 Warning The IPMI driver read a registry parameter that was invalid, the driver used a default value for the registry parameter HKLM\SYSTEM\CurrentControlSet\Control\IPMI\%2. 1003 Error The IPMI device driver attempted to communicate with the IPMI BMC device during device creation. However the communication failed due to a timeout. Either the configured timeouts are too small and the IPMI BMC device responses take longer than the timeouts or the BMC has a technical fault. You can increase the timeouts associated with the IPMI device driver. 1004 Error The IPMI device driver attempted to communicate with the IPMI BMC device during normal operation. However the communication failed due to a timeout. You can increase the timeouts associated with the IPMI device driver located in the registry at HKLM\SYSTEM\CurrentControlSet\Control\IPMI. 2000 Informational \Device\CpqHlth, The Hewlett Packard IPMI device driver was loaded. 2001 Error The Hewlett Packard IPMI device driver could not load. NTSTATUS return code is shown in data field. 2002 Warning The IPMI device driver could not open the IML soft log in the windows registry: %2. hpWbemDump Events Source in Windows Event Log: hpWbemDump Event ID Event Severity Event Description 1001 HP WBEM data was captured and compressed as a raw data format.%nOriginal Informational Size=%1, Compressed Size=%2, WMI Queries=%3, WMI Instances=%4, WMI Properties=%5.%nAll succeeded. 1002 Warning HP WBEM data was captured and compressed as a raw data format.%nOriginal Size=%1, Compressed Size=%2, WMI Queries=%3, WMI Instances=%4, WMI Properties=%5.%nFailed class List:%n%6 1003 HP WBEM system data was captured and compressed as a raw data Informational format.%nOriginal Size=%1, Compressed Size=%2, WMI Queries=%3, WMI Instances=%4, WMI Properties=%5.%nAll succeeded. 1004 Warning HP WBEM system data was captured and compressed as a raw data format.%nOriginal Size=%1, Compressed Size=%2, WMI Queries=%3, WMI Instances=%4, WMI Properties=%5.%nFailed class List:%n%6 1005 HP WBEM storage data was captured and compressed as a raw data Informational format.%nOriginal Size=%1, Compressed Size=%2, WMI Queries=%3, WMI Instances=%4, WMI Properties=%5.%nAll succeeded. 1006 Warning HP WBEM storage data was captured and compressed as a raw data format.%nOriginal Size=%1, Compressed Size=%2, WMI Queries=%3, WMI Instances=%4, WMI Properties=%5.%nFailed class List:%n%6 106 WBEM Provider Event Tables