HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 15

SAL_B not in FIT table. Probable Cause: Internal Error or ROM is corrupted.

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Event ID Event Severity Event Description 5060 Error Trap taken. Probable Cause: This will follow other events indicating some type of IVT error. Recommended Action: This event is for debugging the address, other events will determine the user action. WBEM EventID: 233. WBEM ProviderName: FPL_IndicationProvider 5063 Warning LDB State bad on entry. Probable Cause: No action is required WBEM EventID: 234. WBEM ProviderName: FPL_IndicationProvider 5064 Error Interrupt with ic bit clear. Probable Cause: Interrupt context was lost because the ic bit was cleared. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 235. WBEM ProviderName: FPL_IndicationProvider 5065 Error Min-state registration failure. Probable Cause: Registering of the processor min state save area with PAL has failed. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 236. WBEM ProviderName: FPL_IndicationProvider 5067 Warning Boot monarch timed out. Probable Cause: The monarch has timed out. Recommended Action: No action is required. Replace CPU if problem persists, system will reboot after this event. WBEM EventID: 238. WBEM ProviderName: FPL_IndicationProvider 5069 Error PAL_B not in FIT table. Probable Cause: Internal Error or ROM is corrupted. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 239. WBEM ProviderName: FPL_IndicationProvider 5070 Error SAL_B not in FIT table. Probable Cause: Internal Error or ROM is corrupted. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 240. WBEM ProviderName: FPL_IndicationProvider 5073 Error NVRAM test fail. Probable Cause: NVM is corrupt or bad. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 241. WBEM ProviderName: FPL_IndicationProvider 5076 Error Interrupt vector out of range. Probable Cause: An internal error has occurred. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 242. WBEM ProviderName: FPL_IndicationProvider 5077 Error Pal proc error getting pal copy info. Probable Cause: PAL_COPY_PAL_INFO call returned a failure. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 243. WBEM ProviderName: FPL_IndicationProvider 5078 Error Pal proc error copying pal to memory. Probable Cause: There has been an error copying PAL to memory. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 244. WBEM ProviderName: FPL_IndicationProvider 5079 Warning Boot pal proc failure. Probable Cause: Internal PAL Error. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 245. WBEM ProviderName: FPL_IndicationProvider 5080 Warning Console device failure. Probable Cause: A console device has failed. Recommended Action: Reset console device/system. WBEM EventID: 246. WBEM ProviderName: FPL_IndicationProvider 5081 Warning Platform interface device failure. Probable Cause: A console device has failed. Recommended Action: Reset console device/system. If problem persists contact your HP representative for support. WBEM EventID: 247. WBEM ProviderName: FPL_IndicationProvider 5082 Warning platform scratch RAM test failed. Probable Cause: Bad or corrupt Scratch RAM. Recommended Action: Reboot, if problem persists contact your HP representative for support. WBEM EventID: 248. WBEM ProviderName: FPL_IndicationProvider 5083 Warning CPU rendezvous failure. Probable Cause: Bad or slow CPU. Recommended Action: Replace CPU. WBEM EventID: 249. WBEM ProviderName: FPL_IndicationProvider Platform Events 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Trap taken. Probable Cause: This will follow other events indicating some type of
IVT error. Recommended Action: This event is for debugging the address, other
events will determine the user action. WBEM EventID: 233. WBEM ProviderName:
FPL_IndicationProvider
Error
5060
LDB State bad on entry. Probable Cause: No action is required WBEM EventID: 234.
WBEM ProviderName: FPL_IndicationProvider
Warning
5063
Interrupt with ic bit clear. Probable Cause: Interrupt context was lost because the ic
bit was cleared. Recommended Action: Reboot, if problem persists contact your HP
representative for support. WBEM EventID: 235. WBEM ProviderName:
FPL_IndicationProvider
Error
5064
Min-state registration failure. Probable Cause: Registering of the processor min state
save area with PAL has failed. Recommended Action: Reboot, if problem persists
contact your HP representative for support. WBEM EventID: 236. WBEM
ProviderName: FPL_IndicationProvider
Error
5065
Boot monarch timed out. Probable Cause: The monarch has timed out. Recommended
Action: No action is required. Replace CPU if problem persists, system will reboot
after this event. WBEM EventID: 238. WBEM ProviderName: FPL_IndicationProvider
Warning
5067
PAL_B not in FIT table. Probable Cause: Internal Error or ROM is corrupted.
Recommended Action: Reboot, if problem persists contact your HP representative
for support. WBEM EventID: 239. WBEM ProviderName: FPL_IndicationProvider
Error
5069
SAL_B not in FIT table. Probable Cause: Internal Error or ROM is corrupted.
Recommended Action: Reboot, if problem persists contact your HP representative
for support. WBEM EventID: 240. WBEM ProviderName: FPL_IndicationProvider
Error
5070
NVRAM test fail. Probable Cause: NVM is corrupt or bad. Recommended Action:
Reboot, if problem persists contact your HP representative for support. WBEM
EventID: 241. WBEM ProviderName: FPL_IndicationProvider
Error
5073
Interrupt vector out of range. Probable Cause: An internal error has occurred.
Recommended Action: Reboot, if problem persists contact your HP representative
for support. WBEM EventID: 242. WBEM ProviderName: FPL_IndicationProvider
Error
5076
Pal proc error getting pal copy info. Probable Cause: PAL_COPY_PAL_INFO call
returned a failure. Recommended Action: Reboot, if problem persists contact your
HP representative for support. WBEM EventID: 243. WBEM ProviderName:
FPL_IndicationProvider
Error
5077
Pal proc error copying pal to memory. Probable Cause: There has been an error
copying PAL to memory. Recommended Action: Reboot, if problem persists contact
your HP representative for support. WBEM EventID: 244. WBEM ProviderName:
FPL_IndicationProvider
Error
5078
Boot pal proc failure. Probable Cause: Internal PAL Error. Recommended Action:
Reboot, if problem persists contact your HP representative for support. WBEM
EventID: 245. WBEM ProviderName: FPL_IndicationProvider
Warning
5079
Console device failure. Probable Cause: A console device has failed. Recommended
Action: Reset console device/system. WBEM EventID: 246. WBEM ProviderName:
FPL_IndicationProvider
Warning
5080
Platform interface device failure. Probable Cause: A console device has failed.
Recommended Action: Reset console device/system. If problem persists contact your
HP representative for support. WBEM EventID: 247. WBEM ProviderName:
FPL_IndicationProvider
Warning
5081
platform scratch RAM test failed. Probable Cause: Bad or corrupt Scratch RAM.
Recommended Action: Reboot, if problem persists contact your HP representative
for support. WBEM EventID: 248. WBEM ProviderName: FPL_IndicationProvider
Warning
5082
CPU rendezvous failure. Probable Cause: Bad or slow CPU. Recommended Action:
Replace CPU. WBEM EventID: 249. WBEM ProviderName: FPL_IndicationProvider
Warning
5083
Platform Events
15