HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 74
your HP Support Representative to analyze the fabric WBEM EventID: 2924. WBEM
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Event ID Event Severity Event Description 10378 Warning XBC port with an unexpected neighbor chip type. Data field: (expected chip type) | (actual chip type 16) | (xbcNum 32) |(portNum 48). Probable Cause: System firmware noticed a discrepancy from the expected topology of the system. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2921. WBEM ProviderName: FPL_IndicationProvider 10379 Warning An XBC port was found to have an unexpected neighbor ID. Data field: (expected NID) | (actual NID 16) | (xbcNum 32) | (portNum 48). Probable Cause: System firmware found a discrepancy in the expected topology of the system. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2922. WBEM ProviderName: FPL_IndicationProvider 10380 Warning An XBC was found to have an unexpected neighbor port connection. Data field: (expected port) | (actual port 16) | (xbcNum 32) | (portNum 48). Probable Cause: System firmware found a discrepancy in the expected topology of the system. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2923. WBEM ProviderName: FPL_IndicationProvider 10381 Warning The expected data was not found in the Arches Fabric expected edge list. Data field is unused. Probable Cause: Internal system firmware error or data corruption. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2924. WBEM ProviderName: FPL_IndicationProvider 10382 Warning An XBC port has an unexpected neighbor chip type. Data field: neighbor type found. Probable Cause: System firmware found an unexpected chip in the system. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2925. WBEM ProviderName: FPL_IndicationProvider 10384 Warning A previously good XBC-XBC link was found to be down. Data field: (xbcNum 32) | (portNum 48). Probable Cause: A link that was previously healthy was found to be down. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2926. WBEM ProviderName: FPL_IndicationProvider 10385 Warning An XBC port was found to have a Fatal Error during traversability test. Data field: (xbcNum 32) | (portNum 48). Probable Cause: A link was found to have fatal errors, possible bad link/connection. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2927. WBEM ProviderName: FPL_IndicationProvider 10386 Warning Unable to read the local cell's LINK_SEL_FABRIC CSR. Data field: unused. Probable Cause: System firmware was unable to read a hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2928. WBEM ProviderName: FPL_IndicationProvider 10387 Warning Unable to read the XBC route table. Data field: (route index) | (xbcNum 32) | (portNum 48). Probable Cause: System firmware was unable to read a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2929. WBEM ProviderName: FPL_IndicationProvider 10388 Warning An XBC link was found to be not connected while testing CSR traffic traversability. Data field: (xbcNum 32) | (portNum 48). Probable Cause: A previously healthy link was found to be down. Possible bad cable/connection. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2930. WBEM ProviderName: FPL_IndicationProvider 74 WBEM Provider Event Tables