HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 28
The Stable Complex Profile Sequence Id is invalid. Probable Cause: Push out a new
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Event ID Event Severity Event Description 5558 Error This indicates that the cell missed the rendezvous at the partition level. Probable Cause: The cell will independently step through some of the error logging steps and then finally reset itself. WBEM EventID: 559. WBEM ProviderName: FPL_IndicationProvider 5559 Error This means that the PD monarch timedout. Probable Cause: The cell will be reset ; also the partition will be reset. WBEM EventID: 560. WBEM ProviderName: FPL_IndicationProvider 5560 Error SetViewRoot on a remote cell failed. Probable Cause: Inter Processor interrupts failed. Be sure that the partition rendezvous was successfully completed. Reset. WBEM EventID: 2452. WBEM ProviderName: FPL_IndicationProvider 5566 Error Failed to update CSR contents. Probable Cause: Coherency controller on cell sending event is suspect. Recommended Action: Provide event data to HP support center for assistance. WBEM EventID: 2431. WBEM ProviderName: FPL_IndicationProvider 5567 Error This indicates the failure in collecting the Complex profile info. Probable Cause: The partition level memory interleaving cannot continue without the appropriate information. WBEM EventID: 563. WBEM ProviderName: FPL_IndicationProvider 5568 Error This chassis code indicates the failure in collecting the cell info. Probable Cause: The partition level memory will fail. WBEM EventID: 564. WBEM ProviderName: FPL_IndicationProvider 5569 Error This indicates the failure in updating the GNI info of the cell with CLM. Probable Cause: The partition level memory will fail at this point. WBEM EventID: 565. WBEM ProviderName: FPL_IndicationProvider 5570 Error This indicates the failure in adjusting the mem info with Minimum ZI req. Probable Cause: This will cause the partition level memory to exit cell interleaving. WBEM EventID: 566. WBEM ProviderName: FPL_IndicationProvider 5572 Error Complex Profile A has a checksum error. Probable Cause: Reconfigure the system get a new complex profile distributed and reset. WBEM EventID: 2453. WBEM ProviderName: FPL_IndicationProvider 5573 Warning A Checksum error was encountered in the dynamic profile. Probable Cause: Push out a new complex profile and reset. WBEM EventID: 1861. WBEM ProviderName: FPL_IndicationProvider 5574 Warning A checksum error occurred on the Partition Profile. Probable Cause: Push out a new complex profile and reboot. WBEM EventID: 1862. WBEM ProviderName: FPL_IndicationProvider 5575 Error The Stable Complex Profile Sequence Id is invalid. Probable Cause: Push out a new complex profile and reset the system. The cell will be waiting for reconfiguration. WBEM EventID: 2454. WBEM ProviderName: FPL_IndicationProvider 5577 Warning The Dynamic Complex Profile Sequence ID is invalid. Probable Cause: Push out a new complex profile. WBEM EventID: 2455. WBEM ProviderName: FPL_IndicationProvider 5578 Error The Partition Profile Sequence ID is invalid. Probable Cause: Push out a new complex profile and reset. The cell will be waiting for reconfiguration. WBEM EventID: 2456. WBEM ProviderName: FPL_IndicationProvider 5579 Error Internal Firmware Programming Error from the EFI portion of the firmware. Probable Cause: Report the IPF to the firmware team. Reset the system. This cannot be worked around in the field. WBEM EventID: 570. WBEM ProviderName: FPL_IndicationProvider 5580 Error The PD numbers in Group A and Group C of the complex profile are inconsistent. Probable Cause: Push out consistent Complex profiles and reset the system. The cell will be waiting for reconfiguration. WBEM EventID: 2457. WBEM ProviderName: FPL_IndicationProvider 28 WBEM Provider Event Tables