HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 30

MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Event ID Event Severity Event Description 5606 Warning PAL B execution rom warning. Probable Cause: PAL_B_ROM has generated a warning. Recommended Action: Reboot, update SFW if necessary, if problem persists contact your HP representative for support. WBEM EventID: 588. WBEM ProviderName: FPL_IndicationProvider 5607 Error An error was encountered when firmware tried to update the Group B Profile. Probable Cause: Utilities may be unavailable to update the profiles. Check the connections are reset. WBEM EventID: 1030. WBEM ProviderName: FPL_IndicationProvider 5617 Warning PCI parity error detected. Probable Cause: I/O bus parity error. Recommended Action: Consult the error logs for additional information. Determine and replace the failed I/O device. WBEM EventID: 430. WBEM ProviderName: FPL_IndicationProvider 5618 Warning PCI system error detected. Probable Cause: I/O device failure. Recommended Action: Consult the error logs for additional information. Determine and replace the failed I/O device. WBEM EventID: 431. WBEM ProviderName: FPL_IndicationProvider 5619 Warning I/O host bridge is deconfigured. Probable Cause: See earlier error event. Recommended Action: See earlier error event. WBEM EventID: 432. WBEM ProviderName: FPL_IndicationProvider 5621 Error Firmware was unable to publish the Partition Profile. Probable Cause: Utilities may be unavailable to update the profiles. Check the connections are reset. WBEM EventID: 1008. WBEM ProviderName: FPL_IndicationProvider 5622 Error The reporting cell is not configured to be in a PD. Probable Cause: Run parmgr to configure the cell into a PD and reset the PD or add the cell. WBEM EventID: 434. WBEM ProviderName: FPL_IndicationProvider 5623 Warning DIMM thermal loading order warning. Probable Cause: The current DIMM loading order does not follow the guidelines in the user manual Recommended Action: Rearrange the DIMMs to follow the loading order specified in the Maintenance and Operation Manual WBEM EventID: 435. WBEM ProviderName: FPL_IndicationProvider 5626 Error The PD cannot boot, a majority of cells did not arrive at Rendezvous. Probable Cause: PD Rendezvous Boot Rules: If greater than 50% of the assigned cells are rendezvoused, we will boot. If less than 50% of the assigned cells are rendezvoused, don't boot. If exactly 50% of the assigned cells are rendezvoused, including all of the preferred core cells, we will boot. If exactly 50% have rendezvoused, and there is a specified preferred core cell not rendezvoused, don't boot. If exactly 50% have rendezvoused, and there are no preferred core cells, don't boot. If any of the above apply in preventing the boot. Reconfigure the PD and reboot. WBEM EventID: 437. WBEM ProviderName: FPL_IndicationProvider 5638 Warning INIT: Monarch failed in slave rendezvous. Probable Cause: A processor has failed rendezvous. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 439. WBEM ProviderName: FPL_IndicationProvider 5646 Warning MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was unable to log or clear I/O error registers. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 440. WBEM ProviderName: FPL_IndicationProvider 5655 Warning MC: MCA to BERR escalation not supported by PAL. Probable Cause: Cannot escalate an MCA to BERR. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. WBEM EventID: 441. WBEM ProviderName: FPL_IndicationProvider 5656 Warning MC: MCA to BINIT escalation not supported by PAL. Probable Cause: Cannot escalate an MCA to BINIT. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. WBEM EventID: 442. WBEM ProviderName: FPL_IndicationProvider 30 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
PAL B execution rom warning. Probable Cause: PAL_B_ROM has generated a
warning. Recommended Action: Reboot, update SFW if necessary, if problem persists
contact your HP representative for support. WBEM EventID: 588. WBEM
ProviderName: FPL_IndicationProvider
Warning
5606
An error was encountered when firmware tried to update the Group B Profile.
Probable Cause: Utilities may be unavailable to update the profiles. Check the
connections are reset. WBEM EventID: 1030. WBEM ProviderName:
FPL_IndicationProvider
Error
5607
PCI parity error detected. Probable Cause: I/O bus parity error. Recommended Action:
Consult the error logs for additional information. Determine and replace the failed
I/O device. WBEM EventID: 430. WBEM ProviderName: FPL_IndicationProvider
Warning
5617
PCI system error detected. Probable Cause: I/O device failure. Recommended Action:
Consult the error logs for additional information. Determine and replace the failed
I/O device. WBEM EventID: 431. WBEM ProviderName: FPL_IndicationProvider
Warning
5618
I/O host bridge is deconfigured. Probable Cause: See earlier error event.
Recommended Action: See earlier error event. WBEM EventID: 432. WBEM
ProviderName: FPL_IndicationProvider
Warning
5619
Firmware was unable to publish the Partition Profile. Probable Cause: Utilities may
be unavailable to update the profiles. Check the connections are reset. WBEM EventID:
1008. WBEM ProviderName: FPL_IndicationProvider
Error
5621
The reporting cell is not configured to be in a PD. Probable Cause: Run parmgr to
configure the cell into a PD and reset the PD or add the cell. WBEM EventID: 434.
WBEM ProviderName: FPL_IndicationProvider
Error
5622
DIMM thermal loading order warning. Probable Cause: The current DIMM loading
order does not follow the guidelines in the user manual Recommended Action:
Rearrange the DIMMs to follow the loading order specified in the Maintenance and
Operation Manual WBEM EventID: 435. WBEM ProviderName:
FPL_IndicationProvider
Warning
5623
The PD cannot boot, a majority of cells did not arrive at Rendezvous. Probable Cause:
PD Rendezvous Boot Rules: If greater than 50% of the assigned cells are rendezvoused,
we will boot. If less than 50% of the assigned cells are rendezvoused, don't boot. If
exactly 50% of the assigned cells are rendezvoused, including all of the preferred
core cells, we will boot. If exactly 50% have rendezvoused, and there is a specified
preferred core cell not rendezvoused, don't boot. If exactly 50% have rendezvoused,
and there are no preferred core cells, don't boot. If any of the above apply in
preventing the boot. Reconfigure the PD and reboot. WBEM EventID: 437. WBEM
ProviderName: FPL_IndicationProvider
Error
5626
INIT: Monarch failed in slave rendezvous. Probable Cause: A processor has failed
rendezvous. Recommended Action: Reboot if necessary, if problem persists contact
your HP representative for support. WBEM EventID: 439. WBEM ProviderName:
FPL_IndicationProvider
Warning
5638
MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was
unable to log or clear I/O error registers. Recommended Action: Reboot if necessary,
if problem persists contact your HP representative for support. WBEM EventID: 440.
WBEM ProviderName: FPL_IndicationProvider
Warning
5646
MC: MCA to BERR escalation not supported by PAL. Probable Cause: Cannot escalate
an MCA to BERR. Recommended Action: Analyze Machine Check Logs using
diagnostic tools and EFI tools. WBEM EventID: 441. WBEM ProviderName:
FPL_IndicationProvider
Warning
5655
MC: MCA to BINIT escalation not supported by PAL. Probable Cause: Cannot escalate
an MCA to BINIT. Recommended Action: Analyze Machine Check Logs using
diagnostic tools and EFI tools. WBEM EventID: 442. WBEM ProviderName:
FPL_IndicationProvider
Warning
5656
30
WBEM Provider Event Tables