HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 53

either the PCI card or the I/O backplane WBEM EventID: 788. WBEM ProviderName

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Event ID Event Severity Event Description 8711 Error An error was encountered while resetting the SBA. Probable Cause: The SBA component could not reset one or more LBA ropes, probably due to faulty hardware. Recommended Action: Replace the failed IO backplane. WBEM EventID: 781. WBEM ProviderName: FPL_IndicationProvider 8712 Warning There was an error initializing the IO link. Probable Cause: The SBA IO link could not be initialized, probably due to cable installation errors or faulty hardware. Recommended Action: Re-install or replace the cables; replace the IO backplane. WBEM EventID: 782. WBEM ProviderName: FPL_IndicationProvider 8713 Warning There is a problem initializing the REO cable. Probable Cause: An SBA IO cable error has been detected. Recommended Action: Verify proper cable connection, repair/replace the cables. WBEM EventID: 783. WBEM ProviderName: FPL_IndicationProvider 8714 Error The IO chassis discovered was powered off. Probable Cause: Connected IO chassis is powered off. Recommended Action: Either power on the IO chassis or ignore the error if it is powered off by design. WBEM EventID: 784. WBEM ProviderName: FPL_IndicationProvider 8715 Warning There was an error initializing the LBA. Probable Cause: The LBA component initialization routine failed. Recommended Action: This is an internal system firmware error. Update system firmware or contact a system firmware representative. WBEM EventID: 785. WBEM ProviderName: FPL_IndicationProvider 8716 Error There was an error querying the LBA width. Probable Cause: Error while writing the LBA phase data Recommended Action: Replace the I/O backplane WBEM EventID: 786. WBEM ProviderName: FPL_IndicationProvider 8717 Warning There was an error with the LBA phase. Probable Cause: Error while writing the LBA phase data Recommended Action: Replace the I/O backplane WBEM EventID: 787. WBEM ProviderName: FPL_IndicationProvider 8718 Warning There was an error clearing the LBA. Probable Cause: Unable to clear an error in the LBA Recommended Action: Check other events for the error being generated replace either the PCI card or the I/O backplane WBEM EventID: 788. WBEM ProviderName: FPL_IndicationProvider 8719 Error There was an error with the LBA log. Probable Cause: The LBA component could not generate error logs. Recommended Action: This is an internal system firmware error. Update system firmware or contact a system firmware representative. WBEM EventID: 789. WBEM ProviderName: FPL_IndicationProvider 8720 Error There was an error discovering the LBA. Probable Cause: The wrong backplane type was detected Recommended Action: replace I/O backplane WBEM EventID: 790. WBEM ProviderName: FPL_IndicationProvider 8721 Warning There was an error configuring the LBA. Probable Cause: Unable to configure the LBA Recommended Action: replace I/O backplane WBEM EventID: 791. WBEM ProviderName: FPL_IndicationProvider 8722 Error There was an error scanning the PCI bus. Probable Cause: Could not scan the card in a populated slot. Typically caused by an improperly installed or faulty PCI card. Recommended Action: Reseat or replace the faulty card. WBEM EventID: 792. WBEM ProviderName: FPL_IndicationProvider 8723 Error There was an error configuring PCI space through the LBA. Probable Cause: Unable to obtain semaphore Recommended Action: reset Update to latest recipe WBEM EventID: 793. WBEM ProviderName: FPL_IndicationProvider 8745 Warning The OLA cell failed accessing the complex profile. Probable Cause: System firmware was unable to lock either the global or the micro semaphore. Recommended Action: Allow the OLA cell to reboot to BIB, then try the OLA operation again. Or, collect IPMI event logs and contact HP Customer Support for assistance. WBEM EventID: 6954. WBEM ProviderName: FPL_IndicationProvider Platform Events 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
An error was encountered while resetting the SBA. Probable Cause: The SBA
component could not reset one or more LBA ropes, probably due to faulty hardware.
Recommended Action: Replace the failed IO backplane. WBEM EventID: 781. WBEM
ProviderName: FPL_IndicationProvider
Error
8711
There was an error initializing the IO link. Probable Cause: The SBA IO link could
not be initialized, probably due to cable installation errors or faulty hardware.
Recommended Action: Re-install or replace the cables; replace the IO backplane.
WBEM EventID: 782. WBEM ProviderName: FPL_IndicationProvider
Warning
8712
There is a problem initializing the REO cable. Probable Cause: An SBA IO cable error
has been detected. Recommended Action: Verify proper cable connection,
repair/replace the cables. WBEM EventID: 783. WBEM ProviderName:
FPL_IndicationProvider
Warning
8713
The IO chassis discovered was powered off. Probable Cause: Connected IO chassis
is powered off. Recommended Action: Either power on the IO chassis or ignore the
error if it is powered off by design. WBEM EventID: 784. WBEM ProviderName:
FPL_IndicationProvider
Error
8714
There was an error initializing the LBA. Probable Cause: The LBA component
initialization routine failed. Recommended Action: This is an internal system firmware
error. Update system firmware or contact a system firmware representative. WBEM
EventID: 785. WBEM ProviderName: FPL_IndicationProvider
Warning
8715
There was an error querying the LBA width. Probable Cause: Error while writing
the LBA phase data Recommended Action: Replace the I/O backplane WBEM EventID:
786. WBEM ProviderName: FPL_IndicationProvider
Error
8716
There was an error with the LBA phase. Probable Cause: Error while writing the LBA
phase data Recommended Action: Replace the I/O backplane WBEM EventID: 787.
WBEM ProviderName: FPL_IndicationProvider
Warning
8717
There was an error clearing the LBA. Probable Cause: Unable to clear an error in the
LBA Recommended Action: Check other events for the error being generated replace
either the PCI card or the I/O backplane WBEM EventID: 788. WBEM ProviderName:
FPL_IndicationProvider
Warning
8718
There was an error with the LBA log. Probable Cause: The LBA component could
not generate error logs. Recommended Action: This is an internal system firmware
error. Update system firmware or contact a system firmware representative. WBEM
EventID: 789. WBEM ProviderName: FPL_IndicationProvider
Error
8719
There was an error discovering the LBA. Probable Cause: The wrong backplane type
was detected Recommended Action: replace I/O backplane WBEM EventID: 790.
WBEM ProviderName: FPL_IndicationProvider
Error
8720
There was an error configuring the LBA. Probable Cause: Unable to configure the
LBA Recommended Action: replace I/O backplane WBEM EventID: 791. WBEM
ProviderName: FPL_IndicationProvider
Warning
8721
There was an error scanning the PCI bus. Probable Cause: Could not scan the card
in a populated slot. Typically caused by an improperly installed or faulty PCI card.
Recommended Action: Reseat or replace the faulty card. WBEM EventID: 792. WBEM
ProviderName: FPL_IndicationProvider
Error
8722
There was an error configuring PCI space through the LBA. Probable Cause: Unable
to obtain semaphore Recommended Action: reset Update to latest recipe WBEM
EventID: 793. WBEM ProviderName: FPL_IndicationProvider
Error
8723
The OLA cell failed accessing the complex profile. Probable Cause: System firmware
was unable to lock either the global or the micro semaphore. Recommended Action:
Allow the OLA cell to reboot to BIB, then try the OLA operation again. Or, collect
IPMI event logs and contact HP Customer Support for assistance. WBEM EventID:
6954. WBEM ProviderName: FPL_IndicationProvider
Warning
8745
Platform Events
53