HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 50

to the same XBC. Check CC, Check XBC, Contact HP Support Personnel. WBEM

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Event ID Event Severity Event Description 8195 Error Failed reading an XBC forward progress register. Probable Cause: Fabric access error Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 726. WBEM ProviderName: FPL_IndicationProvider 8198 Error Could not find an adjacent XBC due to broken fabric links. Probable Cause: Possible crossbar failure Recommended Action: Contact HP Support personnel to analyze the crossbar. WBEM EventID: 727. WBEM ProviderName: FPL_IndicationProvider 8199 Warning The run-time verification of a programming assumption has failed. Probable Cause: Hardware in unknown state, or programming bug found. Recommended Action: Upgrade PM firmware to latest revision. If already at current revision, replace UGUY board. WBEM EventID: 728. WBEM ProviderName: FPL_IndicationProvider 8200 Warning An unknown error has been detected by the PDHC firmware. Probable Cause: Hardware in unknown state, or programming bug found. Recommended Action: Upgrade PM firmware to latest revision. If already at current revision, replace UGUY board. WBEM EventID: 729. WBEM ProviderName: FPL_IndicationProvider 8202 Error Data field contains data meant for firmware debug only. Probable Cause: Debug event. Recommended Action: Contact your hp support representative. WBEM EventID: 2440. WBEM ProviderName: FPL_IndicationProvider 8205 Warning Testing of correctable errors injected from the CC has failed. Probable Cause: Either the CC failed to inject the errors, the XBC failed to detect them, or PDC could not access the XBC CSR. Recommended Action: Check results from other cells connected to the same XBC. Check CC, Check XBC, Contact HP Support Personnel. WBEM EventID: 731. WBEM ProviderName: FPL_IndicationProvider 8206 Error A cabinet has been configured using an invalid cabinet number. Probable Cause: Re-configure cabinet to use a valid cabinet number WBEM EventID: 732. WBEM ProviderName: FPL_IndicationProvider 8207 Error Cells trying to join a PD are at incompatible firmware revisions. Probable Cause: The reporting cell is at a different firmware revision than the cell reported in the data field. A PD cannot be established. Please reprogram the 2 cells to the same firmware revision. WBEM EventID: 733. WBEM ProviderName: FPL_IndicationProvider 8212 Warning An attempt to write to a device on the PM's I2C bus has failed. Probable Cause: A hardware error has occurred. Recommended Action: Replace the UGUY board. WBEM EventID: 734. WBEM ProviderName: FPL_IndicationProvider 8214 Warning An attempt to read from a device on the PM's I2C bus has failed. Probable Cause: A hardware error has occurred. Recommended Action: Replace the UGUY board. WBEM EventID: 735. WBEM ProviderName: FPL_IndicationProvider 8216 Warning An error was encountered updating the cell info structure in ICM. Probable Cause: This should not happen. Contact engineering to diagnose the problem. WBEM EventID: 736. WBEM ProviderName: FPL_IndicationProvider 8218 Warning An error was encountered pointing the slave cell consoles to the diva. Probable Cause: A CPU on the slave cell could not process an interrupt in time or establish the diva console. WBEM EventID: 737. WBEM ProviderName: FPL_IndicationProvider 8219 Error An error was encountered trying to relocate a slave cells registry. Probable Cause: There could be a PD rendezvous error or a processor on the slave cell failed to respond to an interrupt in time. WBEM EventID: 738. WBEM ProviderName: FPL_IndicationProvider 8220 Error Complex Profile Group C CRC didn't match the expected value. Probable Cause: Push out a new Group C complex profile. WBEM EventID: 2441. WBEM ProviderName: FPL_IndicationProvider 8238 Error Failure to identify a core cell during Global MCA. Probable Cause: This will lead to a system reset. WBEM EventID: 1034. WBEM ProviderName: FPL_IndicationProvider 8239 Warning Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 742. WBEM ProviderName: FPL_IndicationProvider 50 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Failed reading an XBC forward progress register. Probable Cause: Fabric access error
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 726. WBEM ProviderName: FPL_IndicationProvider
Error
8195
Could not find an adjacent XBC due to broken fabric links. Probable Cause: Possible
crossbar failure Recommended Action: Contact HP Support personnel to analyze
the crossbar. WBEM EventID: 727. WBEM ProviderName: FPL_IndicationProvider
Error
8198
The run-time verification of a programming assumption has failed. Probable Cause:
Hardware in unknown state, or programming bug found. Recommended Action:
Upgrade PM firmware to latest revision. If already at current revision, replace UGUY
board. WBEM EventID: 728. WBEM ProviderName: FPL_IndicationProvider
Warning
8199
An unknown error has been detected by the PDHC firmware. Probable Cause:
Hardware in unknown state, or programming bug found. Recommended Action:
Upgrade PM firmware to latest revision. If already at current revision, replace UGUY
board. WBEM EventID: 729. WBEM ProviderName: FPL_IndicationProvider
Warning
8200
Data field contains data meant for firmware debug only. Probable Cause: Debug
event. Recommended Action: Contact your hp support representative. WBEM
EventID: 2440. WBEM ProviderName: FPL_IndicationProvider
Error
8202
Testing of correctable errors injected from the CC has failed. Probable Cause: Either
the CC failed to inject the errors, the XBC failed to detect them, or PDC could not
access the XBC CSR. Recommended Action: Check results from other cells connected
to the same XBC. Check CC, Check XBC, Contact HP Support Personnel. WBEM
EventID: 731. WBEM ProviderName: FPL_IndicationProvider
Warning
8205
A cabinet has been configured using an invalid cabinet number. Probable Cause:
Re-configure cabinet to use a valid cabinet number WBEM EventID: 732. WBEM
ProviderName: FPL_IndicationProvider
Error
8206
Cells trying to join a PD are at incompatible firmware revisions. Probable Cause: The
reporting cell is at a different firmware revision than the cell reported in the data
field. A PD cannot be established. Please reprogram the 2 cells to the same firmware
revision. WBEM EventID: 733. WBEM ProviderName: FPL_IndicationProvider
Error
8207
An attempt to write to a device on the PM's I2C bus has failed. Probable Cause: A
hardware error has occurred. Recommended Action: Replace the UGUY board.
WBEM EventID: 734. WBEM ProviderName: FPL_IndicationProvider
Warning
8212
An attempt to read from a device on the PM's I2C bus has failed. Probable Cause: A
hardware error has occurred. Recommended Action: Replace the UGUY board.
WBEM EventID: 735. WBEM ProviderName: FPL_IndicationProvider
Warning
8214
An error was encountered updating the cell info structure in ICM. Probable Cause:
This should not happen. Contact engineering to diagnose the problem. WBEM
EventID: 736. WBEM ProviderName: FPL_IndicationProvider
Warning
8216
An error was encountered pointing the slave cell consoles to the diva. Probable Cause:
A CPU on the slave cell could not process an interrupt in time or establish the diva
console. WBEM EventID: 737. WBEM ProviderName: FPL_IndicationProvider
Warning
8218
An error was encountered trying to relocate a slave cells registry. Probable Cause:
There could be a PD rendezvous error or a processor on the slave cell failed to respond
to an interrupt in time. WBEM EventID: 738. WBEM ProviderName:
FPL_IndicationProvider
Error
8219
Complex Profile Group C CRC didn't match the expected value. Probable Cause:
Push out a new Group C complex profile. WBEM EventID: 2441. WBEM
ProviderName: FPL_IndicationProvider
Error
8220
Failure to identify a core cell during Global MCA. Probable Cause: This will lead to
a system reset. WBEM EventID: 1034. WBEM ProviderName: FPL_IndicationProvider
Error
8238
Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred.
Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 742.
WBEM ProviderName: FPL_IndicationProvider
Warning
8239
50
WBEM Provider Event Tables