HP LaserJet 1010 Service Manual - Page 143

Manual Feed w/Pause MANUALLY FEED [TYPE] [SIZE] Paper Jam 13.JJ.NT JAM IN TRAY 1 Paper Jam 13.JJ.NT JAM IN TRAY X. Mem Overflow / 20 INSUFFICIENT Mem Full (20) MEMORY. Buffer Flow Error (22) Buffer Flow Error (22) Buffer Flow Error Bad Connection (40) Temp. Engine Error (41.x) Temp. Engine Error (41.x) 22 PARALLEL I/O BUFFER OVER. 22 SERIAL I/O BUFFER OVER. 22 USB I/O BUFFER OVERFLOW 40 BAD SERIAL TRANS. 41.3 UNEXPECTED SIZE TRAY XX LOAD TRAY XX [TYPE] [SIZE] 41.X PRINTER ERROR If paper-To Continue, Press [Go] If no paperTo use another tray, Press [Go] Check paper loading then open and close top cover Check paper loading then open and close top cover To continue press [Go] X S XX S S BP B B B P To continue press [Go] To continue press [Go] To continue press [Go] To continue press [Go] XX XX XX X S B S B S B S B S B BP BP BP B P BP Continuable error - LED solid and LED blinking. Press [Go] button. When there is a jam in tray, the user should make sure the paper is loaded correctly, open and close the top cover. Pressing [Go] is ignored. When there is a jam in tray 1, the user should make sure the paper is loaded correctly, open and close the top cover. Pressing [Go] is ignored. Continuable Error. LED on attention light blinking. To continue press [Go]. Clears on job boundary, on job cancel, on online, and auto-continuable. Continuable Error. LED on and LED blinking. To continue press [Go]. Continuable Error. LED on and LED blinking. To continue press [Go]. Continuable Error. LED on and LED blinking. To continue press [Go]. Continuable Error. LED on and LED blinking. To continue press [Go]. Continuable Error. . LED on and LED blinking. To continue press [Go]. To continue X X S B P Continuable Error. Continuable Error. LED on and press [Go] B LED blinking. To continue press [Go]. Fuser High Temp.(50.011) Bad Beam Detect Error (51) * Scanner Error (52) * 50.011 FUSER HIGH TEMPERAUTRE 51.X PRINTER ERROR 52.X PRINTER ERROR Engine Comm. Error (55) * NVRAM Error (68) * 55.X PRINTER ERROR 68.X PERM. STORAGE ERROR NVRAM Error (68) * NVRAM Error (68) * 68.X PERM. STORAGE FULL 68.X PERM. STOR. WRITE FAIL Bad Fuser (50) * CRITICAL ERROR MESSAGES 50.X FUSER ERROR Mapped to secondary light pattern for accessory errors. 53.XY.ZZ PRINTER ERROR To continue press [Go] To continue X press [Go] B B S B S P BP Continuable Error. Continuable Error. LED on and LED blinking. To continue press [Go]. Continuable Error. Continuable Error. LED on and LED blinking. To continue press [Go]. To continue turn off then on SS SP S To continue turn off then on To continue press [Go] SS SP S P XX S B P B To continue press [Go] To continue press [Go] XX XX S B S B BP BP Fatal error - all LEDs solid on. Secondary errors- Push Go and Job button. Secondary fatal error. Ready LED solid. Same kind of issue as 51.X. Do we have a 52.2 that should be autocontinuable. 52.2 is auto continuable (scanner rotation error). The rest need a power cycle. Fatal Error. Formatter not communicating w/ the engine. Fatal Secondary error. Solid attention light. Engine Communication. Continuable Error. LED on and LED blinking. To continue press [Go]. 68 is also in the fatal error section of your original quick reference table, with a blinking Ready light. Continuable Error. LED on and LED blinking. To continue press [Go]. Continuable Error. LED on and LED blinking. To continue press [Go]. To continue turn off then on SS S S S BB BP Fatal error - all LEDs solid. Fatal error. and LEDs are solid. Bad fuser. Accessory error - all LEDs blinking. Fan motor error 57.X PRINTER ERROR ENWW To continue turn off then on S S S P Fatal error - all Leds solid. Fan motor error. Secondary fatal B error. LED blinking. Appendix A 131