HP LaserJet 1010 Service Manual - Page 70
Turn off the printer, unplug the power cord, and wait for the printer to cool
View all HP LaserJet 1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Note The following procedure requires a #2 Phillips-head screwdriver. 1. Turn off the printer, unplug the power cord, and wait for the printer to cool. 2. At the back of the printer, unscrew the two screws holding the separation pad in place. 3. Remove the separation pad. 58 Chapter 5 Removal and replacement ENWW
Note
The following procedure requires a #2 Phillips-head screwdriver.
1.
Turn off the printer, unplug the power cord, and wait for the printer to cool.
2.
At the back of the printer, unscrew the two screws holding the separation pad in place.
3.
Remove the separation pad.
58
Chapter 5
Removal and replacement
ENWW