HP LaserJet 1010 Service Manual - Page 68
Circular and rectangular pegs on each side prevent you from incorrectly positioning
View all HP LaserJet 1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
CAUTION 4. Gently release the small, white tabs on each side of the pickup roller by pushing them away from the roller, and then rotate the pickup roller toward the front. Use gentle pressure to release the small white tabs to avoid breaking them. 5. Gently pull the pickup roller up and out. Note 6. Position the new pickup roller in the slot of the previous pickup roller. Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup roller. 7. Rotate the top of the new pickup roller into position until the white tabs on each side of the roller snap the roller into place. 56 Chapter 5 Removal and replacement ENWW
4.
Gently release the small, white tabs on each side of the pickup roller by pushing them
away from the roller, and then rotate the pickup roller toward the front.
CAUTION
Use gentle pressure to release the small white tabs to avoid breaking them.
5.
Gently pull the pickup roller up and out.
6.
Position the new pickup roller in the slot of the previous pickup roller.
Note
Circular and rectangular pegs on each side prevent you from incorrectly positioning the
pickup roller.
7.
Rotate the top of the new pickup roller into position until the white tabs on each side of
the roller snap the roller into place.
56
Chapter 5
Removal and replacement
ENWW