HP LaserJet 1010 Service Manual - Page 31
Guidelines for using media, Paper and Transparencies, Common media problems table, Labels, Adhesives - ink
View all HP LaserJet 1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Guidelines for using media Note HP LaserJet printers produce excellent print quality documents. You can print on a variety of media, such as paper (including up to 100 percent recycled fiber content paper), envelopes, labels, transparencies, and custom-sized media. Paper and Transparencies Paper must be of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, holes, and curled or bent edges. Check the label on the paper package for details about the type of paper (such as bond or recycled). Some paper causes print quality problems, jamming, or damage to the printer. Do not use letterhead that is printed with low-temperature inks, such as those used in some types of thermography, raised letterhead, or colored paper or preprinted forms that use inks incompatible with the printer temperature [200° C (392° F) for 0.1 second]. Transparencies must be able to withstand 200° C (392° F), the printer's maximum temperature. Common media problems table Symptom Poor print quality or toner adhesion, or problems with feeding. Problem with paper Too moist, too rough, too smooth, or embossed. Faulty paper lot. Dropouts, jamming, or curl. Stored improperly. Increased gray background shading. Might be too heavy. Excessive curl, or problems with Too moist, wrong grain feeding. direction, or short-grain construction. Jamming, or damage to printer. Cutouts or perforations. Problems with feeding. Ragged edges. Solution Try another kind of paper between 100 and 250 Sheffield and 4 to 6 percent moisture content. Store paper flat in its moistureproof wrapping. Use lighter paper. Use long-grain paper. Print using the straight-through output path. Do not use paper with cutouts or perforations. Use good quality paper. Labels When selecting labels, consider the following factors: ● Adhesives: The adhesive material should be stable at 200° C (392° F), the printer's maximum temperature. ● Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. ENWW Guidelines for using media 19