HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - Software Technical Ref - Page 199
Setup instructions, Setting up a printer with Mac OS X v10.4, v10.5, and later, Install Succeeded
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Figure 5-11 Install Succeeded dialog box Click Close to exit the installer. NOTE: After installing the printing-system software, the product must be set up. Setup instructions This section contains information about the following topics: ● Setting up a printer with Mac OS X v10.4, v10.5, and later ● Setting up a printer with Mac OS X v10.3.9 ● Troubleshooting the product setup Setting up a printer with Mac OS X v10.4, v10.5, and later Complete these steps after completing the printing-system software installation. 1. If you are installing the product using a USB connection, connect the USB cable between the product and the computer. Turn on the product. If you are installing using a network connection, verify that the network cable is connected to the product and that the product is on. 2. In the Applications folder (in the Finder utility), open the Utilities folder, and then run the Printer Setup Utility. 3. If you are installing the product using a USB connection, verify that the product appears in the printer list. The Name column in the printer list should display the product name. If this is the case, the USB setup is complete. If the product does not appear, or if the correct information does not appear in the field, see Troubleshooting the product setup on page 185. ENWW Macintosh install and uninstall instructions 181 Macintosh