HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - Software Technical Ref - Page 233
CAUTION, Ready, Select Printer to Update, Send Firmware
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Engineering Details 3. Print a configuration page from the device. Under the Device Information heading, note the datecode and version number. These should change after you have successfully completed the firmware update. To print a configuration page, see Determining the current level of firmware on page 206. 4. Verify that the printer is at a Ready state. 5. On your computer, locate the HP Easy Firmware Upgrade utility file. 6. Double-click the HP Easy Firmware Upgrade utility file. The following dialog box appears. Figure 6-1 HP Easy Firmware Upgrade utility screen 1 7. Click the down arrow next to the Select Printer to Update: drop-down list and select the device you want to update. NOTE: If the device you want to upgrade is not in the list, you must install a printer-driver for the device and be able print to the device with the printer-driver before continuing. Figure 6-2 HP Easy Firmware Upgrade utility screen 2 8. Click the Send Firmware button to begin the update process. CAUTION: Interrupting the firmware upgrade process by turning the printer off and then turning it on again or by attempting to send a print job to the printer might cause the printer to go into an unrecoverable state. ENWW Remote firmware update 215