HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 11

Contents 3-46 Removing the drive blank from the next available hot-plug hard drive bay .......... 3-58 3-47 Installing the HP universal hot-plug tape drive 3-59 3-48 Removing the media bay blanks (tower model 3-61 3-49 Removing the removable media bay blank rails 3-62 3-50 Affixing the removable media bay blank rails to a SCSI or IDE device 3-62 3-51 Installing a SCSI or IDE device in the removable media bays (tower model) ....... 3-63 3-52 Cable routing of an IDE device from the removable media bay to the secondary IDE connector on the system board 3-65 3-53 Removing a CPU or I/O fan 3-67 3-54 Removing a fan basket 3-68 3-55 Extending the system tray 3-68 3-56 Removing the drive air baffle 3-69 3-57 Disconnecting cables from the CD-ROM drive 3-69 3-58 Removing the CD-ROM drive 3-70 3-59 Installing a DVD drive in the CD-ROM drive bay 3-71 3-60 Cabling a DVD drive from the CD-ROM drive bay to the primary IDE connector on the system board 3-72 3-61 Connecting an external device to the VHDCI SCSI connector 3-74 3-62 Connecting an external storage device to an expansion board 3-75 4-1 PCI-X expansion slots and buses 4-3 4-2 Expansion slot speed LEDs 4-6 4-3 Internal expansion slot LEDs and PCI Hot Plug button 4-10 4-4 External expansion slot LEDs 4-11 4-5 Powering down the slot with the port-colored PCI Hot Plug button 4-14 4-6 Releasing the expansion slot latch and removing the expansion slot cover 4-15 4-7 Locking the PCI retaining clip open 4-15 4-8 Inserting a PCI Hot Plug expansion board 4-16 4-9 Securing the PCI retaining clip 4-16 4-10 Powering down the slot with the port-colored PCI Hot Plug button 4-18 4-11 Locking the PCI retaining clip open 4-19 4-12 Releasing the expansion board with the expansion board release handle 4-19 4-13 Removing a PCI Hot Plug expansion board from the server 4-20 5-1 Measuring with the rack template on the front of the rack 5-5 5-2 Inserting cage nuts into the rack frame 5-7 5-3 Inserting the rack rail assembly into the rack (other rack details are removed for clarity)...5-8 5-4 Releasing the rail compression lever 5-9 5-5 Inserting screws to secure the rack rail assembly in the rack 5-10 5-6 Positioning the server rail on the chassis 5-11 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide xi