HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 49

Installing Hardware Options WARNING: To reduce the risk of personal injury or equipment damage, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. • The stabilizers are attached to the rack for single-rack installation. • The racks are coupled in multiple-rack installations. WARNING: To reduce the risk of personal injury from hazardous energy or of damage to the equipment when working on energized servers with precautions: • Remove all watches, rings, and any other loose fitting jewelry. • Avoid the use of conductive tools inside the server that could bridge live parts. CAUTION: For Compaq branded Series 7000 racks, you must install highly ventilated rack door inserts to provide proper front-to-back airflow and cooling. CAUTION: Be sure that your rack meets all recommended space and airflow requirements for your server. HP has equipped the ProLiant ML530 Generation 2 server chassis with a system tray to facilitate the installation of hardware upgrades, particularly accessing the drive fans and internal cabling. Most hardware options are installed onto the system board, the memory board, or in the drive bay. To streamline the installation process, read the installation instructions for all of the hardware options and identify similar steps before installing the hardware options. HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 3-3